Powdered Latex examination Gloves
Ambi. type
Mocro rough surface in the grip area
Mocro rough surface in the grip area
Code 21630
Features:
1. Made from selected natural rubber latex.2. No sensitization response conducted in comlormancc with ISO 13485 Quality Standards.
3. Prime skin irritation test is in accordance wilh the guidelines of the international Organi/alion for
standardization.
4. Excellent hand-fitting, comfort and easy donning.
5. Easy donning and comfort.
Specification:
| Product Description | Powdered Latex Examination Gloves, ambi. type, micro rough surface in the grip area | |||||
| Size | S, M, L | |||||
| Overal Length | 245 +/- 5mm | |||||
| Physical Propetry | Before Aging | After Aging | ||||
| Tensile Strength | 18Mpa | 14Mpa (min) | ||||
| Ultimate elongation | 650% | 500% (min) | ||||
| Sampling Plan | ISO 2859, Manufactured in compliance with current GMP requirement. | |||||
| AQL | Inspection Level | |||||
| Pinhole | 1.5/2.5 | G-1 | ||||
| Major | 2.5 | G-1 | ||||
| Minor | 4.0 | G-1 | ||||
| Physical property&Dimensions | 4.0 | S-2 | ||||
| Reference Document: ASTM D3578-05 | ||||||
Caution:
- This product contains nature rubber latex that may cause allergic reaction in some hypersensitive individual users.
- After donning, remove powder by wiping gloves thoroughly with a sterile wet sponge. sterile wet towel or other effective method
- Should be stored at goods shelf. 20cm off the floor. in a dry and well ventilated areas.
- Tempertures below 30℃(86℉) and 65% humidity.
- Aviod direct sunlight, heat, and high temperatures.
- Aviod direct lighting, heating, and electrical equipment.
- Avoid exposure to UV light Ozone.
